– 33 ft. (10.06M) long for singles play.
– Net Body – 2.5mm PE Twisted.
– 45mm square mesh.
– Net Banding – Side & Bottom of Nets are over-lock edged.
– Headband – Quad Stitched vinyl coated PVC
– Headline Cable – 6mm PVC Coated Steel Cable. With Loop & Pin Finish To Suit Standard Net Posts.
3mm Braided Polyethylene Black – UV treated.
2″ Vinyl Tarpaulin headband.
1½” Vinyl Tarpaulin white side & Bottom band.
Two fiber dowels in the both side Bands.
5mm plastic coated wire 38″.
Eyelets: Two on each corner with 3mm Tie cords.
Designed to hold centre of tennis net in place once height
has been checked. For use on hard or grass courts, heavy steel
ground base simply sits on top of the playing surface.
Braided virgin polypropylene.
UV treated for longer stability and to stand climatic conditions.
Non slippery hand knotted
5″ square mesh
Color: White, Blue, Yellow, Red.
Twin color: Blue/white, Yellow/white.
9 ply PE maroon netting – 19mm mesh. 4cm white PVC head band.
Black fabric band at sides and bottom. Two eyelets each ends
with tie cords. Size 6.10m x 0.76m.
Set consists of 4cm Polypropylene band with eyelets.
4 stakes (pegs) with 4 elastic bands.
Color: Neon orange, hot pink, Neon green, Blue.
Two sidelines (16M) and two end lines (8M) define the playing court. No Centre line.
– Net Body – 2.0mm PE Twisted
– 45mm square mesh 1-3/4″
– Banding – Side & Bottom of Nets are over-locked.
– Headband – Quad Stitched medium duty Vinyl coated PVC
– Headline Cable – 5mm PVC coated Steel Cable with loop & pin finish to suit standard Net Posts.
– Eyelets: Two nos. one at each top corner.
– Tie cord: 5.00mm PE black at top & bottom.
Net Body: 3mm Braided P.E- U.V. stabilized. 100mm square mesh
7cm wide -18oz PVC coated band on all 4 sides with sponsor name.
With 4mm plastic wire on top and 6mm braided cord at bottom.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
Heavy duty & high quality brass construction winder for tennis posts.
• World-class brass winder mechanisms for tennis posts
• Worm gear mechanism with handle & screws included
• Excellent durability-indoor or outdoor
• Weight : 1kg.
• Centre to center of drill holes. 42mm left to right, 104mm top to bottom.
Net Body: 1.5mm PE TWISTED
Size: 9.50M x 1M
100mm square mesh
4cm Bright neon PVC coated Headband
Interlocked sides and bottom.
Eyelets: One eyelet on each corner on top with Tie cords.
