Designed to hold centre of tennis net in place once height
has been checked. For use on hard or grass courts, heavy steel
ground base simply sits on top of the playing surface.
Designed to hold centre of tennis net in place once height has been checked.
For use on hard or grass courts, heavy steel ground base simply sits on top of the playing surface.
Ground Anchor Socket With Eye
Net Body: 1.5mm PE TWISTED
Size: 9.50M x 1M
100mm square mesh
4cm Bright neon PVC coated Headband
Interlocked sides and bottom.
Eyelets: One eyelet on each corner on top with Tie cords.
3 ply NYLON twisted brown netting – 19mm mesh. 4cm white Polyester head band.
Black fabric band at sides and bottom. Two eyelets each ends with tie cords.
With 4mm PE head cord.
– Net Body – 2.0mm PE Twisted
– 45mm square mesh 1-3/4″
– Banding – Side & Bottom of Nets are over-locked.
– Headband – Quad Stitched medium duty Vinyl coated PVC
– Headline Cable – 5mm PVC coated Steel Cable with loop & pin finish to suit standard Net Posts.
– Eyelets: Two nos. one at each top corner.
– Tie cord: 5.00mm PE black at top & bottom.
1mm PE TWISTED. 100mm square mesh.
4cm PVC fabric Headband.
4cm Black fabric on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
– Net Body – 3mm PE Braided (U.V. treated).
– 45mm square mesh.
– Headband – Quad Stitched vinyl coated PVC.
– Net Banding – Side & Bottom of Nets are over-lock edged.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
– Tennis Net Body – 2.5mm PE Twisted + Double layered top 6 mesh
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
