Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
3mm Braided Polyethylene Black – UV treated.
2″ Vinyl Tarpaulin headband.
1½” Vinyl Tarpaulin white side & Bottom band.
Two fiber dowels in the both side Bands.
5mm plastic coated wire 38″.
Eyelets: Two on each corner with 3mm Tie cords.
– Net Body – 2.0mm PE Twisted
– 45mm square mesh 1-3/4″
– Banding – Side & Bottom of Nets are over-locked.
– Headband – Quad Stitched medium duty Vinyl coated PVC
– Headline Cable – 5mm PVC coated Steel Cable with loop & pin finish to suit standard Net Posts.
– Eyelets: Two nos. one at each top corner.
– Tie cord: 5.00mm PE black at top & bottom.
Net Body: 3mm Braided P.E- U.V. stabilized. 100mm square mesh
7cm wide -18oz PVC coated band on all 4 sides.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
Ideal for marking out semi-permanent courts on grass.
Retains line positions, saving time when marking out at start of new season.
Retains line positions.
Designed to hold centre of tennis net in place once height
has been checked. For use on hard or grass courts, heavy steel
ground base simply sits on top of the playing surface.
– Net Body – 3mm PE Braided (U.V. treated).
– 45mm square mesh.
– Headband – Quad Stitched vinyl coated PVC.
– Net Banding – Side & Bottom of Nets are over-lock edged.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
Net Body: 3mm Knotless braided Polypropylene U.V. stabilized.
100mm square mesh.
5cm Bright neon PVC coated band on all 4 sides.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
Braided virgin polypropylene.
UV treated for longer stability and to stand climatic conditions.
Non slippery hand knotted
5″ square mesh
Color: White, Blue, Yellow, Red.
Twin color: Blue/white, Yellow/white.
