Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
Heavy duty & high quality brass construction winder for tennis posts.
• World-class brass winder mechanisms for tennis posts
• Worm gear mechanism with handle & screws included
• Excellent durability-indoor or outdoor
• Weight : 1kg.
• Centre to center of drill holes. 42mm left to right, 104mm top to bottom.
– Tennis Net Body – 2.5mm PE Twisted
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
2mm PE TWISTED – 9.5 x 1m.
100mm square mesh.
5cm PVC fabric Headband.
4cm Black banding on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
Braided virgin polypropylene.
UV treated for longer stability and to stand climatic conditions.
Non slippery hand knotted
5″ square mesh
Color: White, Blue, Yellow, Red.
Twin color: Blue/white, Yellow/white.
Net Body: 3mm Braided P.E- U.V. stabilized. 100mm square mesh
7cm wide -18oz PVC coated band on all 4 sides.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
2.5mm PE TWISTED – 9.5 x 1m.
100mm square mesh.
5cm PVC fabric Headband.
4cm Black banding on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
3 ply NYLON twisted brown netting – 19mm mesh. 4cm white Polyester head band.
Black fabric band at sides and bottom. Two eyelets each ends with tie cords.
With 4mm PE head cord.
