– Net Body – 3mm PE Braided (U.V. treated).
– 45mm square mesh.
– Headband – Quad Stitched vinyl coated PVC.
– Net Banding – Side & Bottom of Nets are over-lock edged.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
3 ply NYLON twisted brown netting – 19mm mesh. 4cm white Polyester head band.
Black fabric band at sides and bottom. Two eyelets each ends with tie cords.
With 4mm PE head cord.
Net Body: 2.5mm PE TWISTED
Size: 9.50M x 1M
100mm square mesh
5cm Bright neon PVC coated band on all 4 sides.
Eyelets: one eyelet on each corner with Tie cords.
Designed to hold centre of tennis net in place once height
has been checked. For use on hard or grass courts, heavy steel
ground base simply sits on top of the playing surface.
Net Body: 3mm Braided P.E- U.V. stabilized. 100mm square mesh
7cm wide -18oz PVC coated band on all 4 sides with sponsor name.
With 4mm plastic wire on top and 6mm braided cord at bottom.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
– 33 ft. (10.06M) long for singles play.
– Net Body – 2.5mm PE Twisted.
– 45mm square mesh.
– Net Banding – Side & Bottom of Nets are over-lock edged.
– Headband – Quad Stitched vinyl coated PVC
– Headline Cable – 6mm PVC Coated Steel Cable. With Loop & Pin Finish To Suit Standard Net Posts.
– Tennis Net Body – 2.5mm PE Twisted
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
3mm Braided Polyethylene Black – UV treated.
2″ Vinyl Tarpaulin headband.
1½” Vinyl Tarpaulin white side & Bottom band.
Two fiber dowels in the both side Bands.
5mm plastic coated wire 38″.
Eyelets: Two on each corner with 3mm Tie cords.
Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
