– Tennis Net Body – 2.5mm PE Twisted + Double layered top 6 mesh
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
Ideal for marking out semi-permanent courts on grass.
Retains line positions, saving time when marking out at start of new season.
Retains line positions.
Designed to hold centre of tennis net in place once height
has been checked. For use on hard or grass courts, heavy steel
ground base simply sits on top of the playing surface.
1mm PE TWISTED. 100mm square mesh.
4cm PVC fabric Headband.
4cm Black fabric on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
2.5mm PE TWISTED – 9.5 x 1m.
100mm square mesh.
5cm PVC fabric Headband.
4cm Black banding on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
3mm Black braided knotless polypropylene UV
100mm square mesh.
5cm Vinyl tarpaulin Headband.
Banding – Side & Bottom of nets are over-lock edged.
Eyelets: Two on each corner on top with 3mm Tie cords.
Net Body: 3mm Braided P.E- U.V. stabilized. 100mm square mesh
7cm wide -18oz PVC coated band on all 4 sides with sponsor name.
With 4mm plastic wire on top and 6mm braided cord at bottom.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
3mm Braided Polyethylene Black – UV treated.
2″ Vinyl Tarpaulin headband.
1½” Vinyl Tarpaulin white side & Bottom band.
Two fiber dowels in the both side Bands.
5mm plastic coated wire 38″.
Eyelets: Two on each corner with 3mm Tie cords.
Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
