– Tennis Net Body – 2.5mm PE Twisted + Double layered top 6 mesh
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
Net Body: 3mm Braided P.E- U.V. stabilized. 100mm square mesh
7cm wide -18oz PVC coated band on all 4 sides with sponsor name.
With 4mm plastic wire on top and 6mm braided cord at bottom.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
Net Body: 3mm Knotless braided Polypropylene U.V. stabilized.
100mm square mesh.
5cm Bright neon PVC coated band on all 4 sides.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
Net Body: 1.5mm PE TWISTED
Size: 9.50M x 1M
100mm square mesh
4cm Bright neon PVC coated Headband
Interlocked sides and bottom.
Eyelets: One eyelet on each corner on top with Tie cords.
– 33 ft. (10.06M) long for singles play.
– Net Body – 2.5mm PE Twisted.
– 45mm square mesh.
– Net Banding – Side & Bottom of Nets are over-lock edged.
– Headband – Quad Stitched vinyl coated PVC
– Headline Cable – 6mm PVC Coated Steel Cable. With Loop & Pin Finish To Suit Standard Net Posts.
– Net Body – 2.0mm PE Twisted
– 45mm square mesh 1-3/4″
– Banding – Side & Bottom of Nets are over-locked.
– Headband – Quad Stitched medium duty Vinyl coated PVC
– Headline Cable – 5mm PVC coated Steel Cable with loop & pin finish to suit standard Net Posts.
– Eyelets: Two nos. one at each top corner.
– Tie cord: 5.00mm PE black at top & bottom.
