– Net Body – 3mm PE Braided + Double layered top 6 mesh (U.V. treated)
– 45mm square mesh
– Headband – Quad Stitched premium polyester headband is woven from treated yarn to enhance visibility, maximize durability and minimize distortion.
– Black Vinyl banding to bottom and sides.
– Headline Cable – 6mm PVC Coated Steel Cable. With loop one side and
D-shackle on the other side.
Eyelets: 14 nos. (5 at each side band & two at each Top corner)
Tie cord: 3.00 mm braided tie cords 12 places length 1.10mtr doubled.
2mm PE TWISTED – 9.5 x 1m.
100mm square mesh.
5cm PVC fabric Headband.
4cm Black banding on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
Designed to hold centre of tennis net in place once height
has been checked. For use on hard or grass courts, heavy steel
ground base simply sits on top of the playing surface.
Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
Net Body: 3mm Braided P.E- U.V. stabilized. 100mm square mesh
7cm wide -18oz PVC coated band on all 4 sides.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
9 ply PE maroon netting – 19mm mesh. 4cm white PVC head band.
Black fabric band at sides and bottom. Two eyelets each ends
with tie cords. Size 6.10m x 0.76m.
– Tennis Net Body – 2.5mm PE Twisted
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
– Tennis Net Body – 2.5mm PE Twisted + Double layered top 6 mesh
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
2.5mm PE TWISTED – 9.5 x 1m.
100mm square mesh.
5cm PVC fabric Headband.
4cm Black banding on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
– Net Body – 3mm PE Braided + Double layered top 6 mesh (U.V. treated)
– 45mm square mesh
– 2½” Headband- Quad Stitched premium polyester headband is woven from treated yarn
to enhance visibility, maximize durability and minimize distortion.
– 2½” Black Vinyl banding on sides with fiber rod side bar.
– 1½” Black Vinyl banding on bottom.
– Headline Cable – 6mm PVC Coated Steel Cable. With loop one side and D-shackle
on the other side.
Eyelets: 14 nos. (5 at each side band & two at each Top corner)
Tie cord: 3.00 mm braided tie cords 12 places length 1.10mtr doubled.
– 41’6″ ft. (12.65M) x 2′ 6″.
– Net Body – 3mm PE Braided.
– 45mm square mesh.
– 2½” Headband- Quad Stitched premium polyester headband is woven from treated
yarn to enhance visibility, maximize durability and minimize distortion.
– 2½” Black Vinyl banding on sides with fiber tube side bar.
– 1” Black Vinyl banding on bottom.
– Headline Cable – 6mm PVC Coated Steel Cable. With Loop one side and
D-shackle on the other side.
Net Body: 3mm Knotless braided Polypropylene U.V. stabilized.
100mm square mesh.
5cm Bright neon PVC coated band on all 4 sides.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
