– Tennis Net Body – 2.5mm PE Twisted
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
2mm PE TWISTED – 9.5 x 1m.
100mm square mesh.
5cm PVC fabric Headband.
4cm Black banding on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
Net Body: 1.5mm PE TWISTED
Size: 9.50M x 1M
100mm square mesh
4cm Bright neon PVC coated Headband
Interlocked sides and bottom.
Eyelets: One eyelet on each corner on top with Tie cords.
– Net Body – 3mm PE Braided + Double layered top 6 mesh (U.V. treated)
– 45mm square mesh
– 2½” Headband- Quad Stitched premium polyester headband is woven from treated yarn
to enhance visibility, maximize durability and minimize distortion.
– 2½” Black Vinyl banding on sides with fiber rod side bar.
– 1½” Black Vinyl banding on bottom.
– Headline Cable – 6mm PVC Coated Steel Cable. With loop one side and D-shackle
on the other side.
Eyelets: 14 nos. (5 at each side band & two at each Top corner)
Tie cord: 3.00 mm braided tie cords 12 places length 1.10mtr doubled.
– Tennis Net Body – 2.5mm PE Twisted + Double layered top 6 mesh
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
Heavy duty & high quality brass construction winder for tennis posts.
• World-class brass winder mechanisms for tennis posts
• Worm gear mechanism with handle & screws included
• Excellent durability-indoor or outdoor
• Weight : 1kg.
• Centre to center of drill holes. 42mm left to right, 104mm top to bottom.
2.5mm PE TWISTED – 9.5 x 1m.
100mm square mesh.
5cm PVC fabric Headband.
4cm Black banding on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
1mm PE TWISTED. 100mm square mesh.
4cm PVC fabric Headband.
4cm Black fabric on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
