Braided virgin polypropylene.
UV treated for longer stability and to stand climatic conditions.
Non slippery hand knotted
5″ square mesh
Color: White, Blue, Yellow, Red.
Twin color: Blue/white, Yellow/white.
2mm PE TWISTED – 9.5 x 1m.
100mm square mesh.
5cm PVC fabric Headband.
4cm Black banding on sides and bottom.
Eyelets: One eyelet on each corner with 3mm braided Tie cords.
Net Body: 3mm Knotless braided Polypropylene U.V. stabilized.
100mm square mesh.
5cm Bright neon PVC coated band on all 4 sides.
Eyelets: Two eyelets on each corner with 3mm Tie cords on D-ring.
– Net Body – 3mm PE Braided (U.V. treated).
– 45mm square mesh.
– Headband – Quad Stitched vinyl coated PVC.
– Net Banding – Side & Bottom of Nets are over-lock edged.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
Set consists of 4cm Polypropylene band with eyelets.
4 stakes (pegs) with 4 elastic bands.
Color: Neon orange, hot pink, Neon green, Blue.
Two sidelines (16M) and two end lines (8M) define the playing court. No Centre line.
– 41’6″ ft. (12.65M) x 2′ 6″.
– Net Body – 3mm PE Braided.
– 45mm square mesh.
– 2½” Headband- Quad Stitched premium polyester headband is woven from treated
yarn to enhance visibility, maximize durability and minimize distortion.
– 2½” Black Vinyl banding on sides with fiber tube side bar.
– 1” Black Vinyl banding on bottom.
– Headline Cable – 6mm PVC Coated Steel Cable. With Loop one side and
D-shackle on the other side.
– Tennis Net Body – 2.5mm PE Twisted + Double layered top 6 mesh
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
Designed to hold centre of tennis net in place once height
has been checked. For use on hard or grass courts, heavy steel
ground base simply sits on top of the playing surface.
Heavy duty & high quality brass construction winder for tennis posts.
• World-class brass winder mechanisms for tennis posts
• Worm gear mechanism with handle & screws included
• Excellent durability-indoor or outdoor
• Weight : 1kg.
• Centre to center of drill holes. 42mm left to right, 104mm top to bottom.
– Tennis Net Body – 2.5mm PE Twisted
– 45mm square mesh
– Headband – Quad Stitched vinyl coated PVC
– Banding – Side & Bottom of Nets are over-lock edged.
– Eyelets: Two nos. one at each top corner.
– Headline Cable – 4mm PVC coated Steel Cable with loop & pin finish
to suit standard Net Posts.
Flexible rubber lines and corners non-slip.Idle for marking out tennis
courts.Use in place of floor paint or indoors where permanent markings
are not possible.
